Single Row Ball Bearings
Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- EBC 6213 ZZ Single Row Ball Bearings
- 400 mm
- 720 mm
- EBC 1620 ZZ Single Row Ball Bearings
- NUP205ET7
- 1
- EBC 6215 ZZ C3 Single Row Ball Bearings
- 0.56
- R155ZZS
- EBC 1615 ZZ Single Row Ball Bearings
- 80 mm
- 130 mm
- EBC 6008 ZZ C3 Single Row Ball Bearings
- 380 mm
- 680 mm
- EBC 6008 C3 Single Row Ball Bearings
- 380 mm
- 620 mm
- EBC 6007 C3 Single Row Ball Bearings
- 190 mm
- 320 mm
- EBC 6209 C3 Single Row Ball Bearings
- 400 mm
- 650 mm
- EBC 6007 ZZ C3 Single Row Ball Bearings
- 150 mm
- 250 mm
- EBC 6207 C3 Single Row Ball Bearings
- 380 mm
- 620 mm
- EBC 6202 ZZ C3 Single Row Ball Bearings
- 340 mm
- 520 mm
- EBC 6010 C3 Single Row Ball Bearings
- 260 mm
- 360 mm