How to use this Angular Contact Ball Bearings guide | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | T | B | C | a | d | D | D1 | d1 |
SS7209 ACD/P4A | SKF | - | 19 mm | 41 kN | 25 mm | 45 mm | 85 mm | 75,7 mm | 57,3 mm |
SS7209 CD/HCP4A | SKF | - | 19 mm | 42,3 kN | 18 mm | 45 mm | 85 mm | 75,7 mm | 57,3 mm |
SS7209 CD/P4A | SKF | - | 19 mm | 42,3 kN | 18 mm | 45 mm | 85 mm | 75,7 mm | 57,3 mm |
SS7209 ACD/HCP4A | SKF | - | 19 mm | 41 kN | 25 mm | 45 mm | 85 mm | 75,7 mm | 57,3 mm |
S7209 ACD/P4A | SKF | - | 19 mm | - | 24.8 mm | 45 mm | 85 mm | - | - |
S7209 CD/HCP4A | SKF | - | 19 mm | - | 18.3 mm | 45 mm | 85 mm | - | - |
S7209 CD/P4A | SKF | - | 19 mm | - | 18.3 mm | 45 mm | 85 mm | - | - |
S7209B | ZEN | - | 19 mm | 37,2 kN | - | 45 mm | 85 mm | - | - |
S7209 ACD/HCP4A | SKF | - | 19 mm | - | 24.8 mm | 45 mm | 85 mm | - | - |
NP727209-90KA1 | Timken | 20 mm | 20 mm | - | - | 50 mm | 80 mm | - | - |
NP727209/NP106970 | Timken | 20 mm | 20 mm | - | - | 50 mm | 80 mm | - | - |
4.331 Inch | 110 Millimeter x 6.693 Inch | 170 Millimeter x 1.102 Inch | 28 Millimeter NTN 7122TLVG Angular Contact Ball Bearings | da:110 mm; db:123.825 mm; dc:106.362 mm; Da:200 mm; Ca:62.89 mm; A1:120.65 mm; A2:231.775 mm; S:4.763 mm; ba:50.006 mm; H:244.475 mm; H1:125.425 mm; H2:52.388 mm; J min.:320.675 mm; J max.:368.3 mm; J1:69.85 mm; L:419.1 mm; N1:22.225 mm; R1:67.866 mm; R2:31.75 mm; RG:3/8 NPT; PG:1/4 NPT; h:45.244 mm; Housing:SAFS 222; Stabilizing ring:SR-22-19; Taconite seal (db shaft position):TER 121; Taconite seal (dc shaft position):TER 113; End plug (suffix Y):EPR 14; Max. speed for Taconite seal:625 r/min; P60°:178 kN; P90°:107 kN; P120°:66.7 kN; P150°:59.6 kN; P180°:72.5 kN; Pa:46.7 kN; Mass pillow block:50.3 kg; Cap bolt:5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 3/8-16 UNC; Appropriate attachment bolt size G:0.75 in; Initial grease fill:481.95 g; |
1.772 Inch | 45 Millimeter x 3.346 Inch | 85 Millimeter x 1.189 Inch | 30.2 Millimeter NSK 3209JC3 Angular Contact Ball Bearings | da:110 mm; db:123.825 mm; dc:106.362 mm; Da:200 mm; Ca:62.89 mm; A1:120.65 mm; A2:231.775 mm; S:4.763 mm; ba:50.006 mm; H:244.475 mm; H1:125.425 mm; H2:52.388 mm; J min.:320.675 mm; J max.:368.3 mm; J1:69.85 mm; L:419.1 mm; N1:22.225 mm; R1:67.866 mm; R2:31.75 mm; RG:3/8 NPT; PG:1/4 NPT; h:45.244 mm; Housing:SAFS 222; Stabilizing ring:SR-22-19; Taconite seal (db shaft position):TER 121; Taconite seal (dc shaft position):TER 113; End plug (suffix Y):EPR 14; Max. speed for Taconite seal:625 r/min; P60°:178 kN; P90°:107 kN; P120°:66.7 kN; P150°:59.6 kN; P180°:72.5 kN; Pa:46.7 kN; Mass pillow block:50.3 kg; Cap bolt:5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 3/8-16 UNC; Appropriate attachment bolt size G:0.75 in; Initial grease fill:481.95 g; |
1.575 Inch | 40 Millimeter x 3.15 Inch | 80 Millimeter x 1.189 Inch | 30.2 Millimeter NSK 3208NRJC3 Angular Contact Ball Bearings | da:110 mm; db:123.825 mm; dc:106.362 mm; Da:200 mm; Ca:62.89 mm; A1:120.65 mm; A2:231.775 mm; S:4.763 mm; ba:50.006 mm; H:244.475 mm; H1:125.425 mm; H2:52.388 mm; J min.:320.675 mm; J max.:368.3 mm; J1:69.85 mm; L:419.1 mm; N1:22.225 mm; R1:67.866 mm; R2:31.75 mm; RG:3/8 NPT; PG:1/4 NPT; h:45.244 mm; Housing:SAFS 222; Stabilizing ring:SR-22-19; Taconite seal (db shaft position):TER 121; Taconite seal (dc shaft position):TER 113; End plug (suffix Y):EPR 14; Max. speed for Taconite seal:625 r/min; P60°:178 kN; P90°:107 kN; P120°:66.7 kN; P150°:59.6 kN; P180°:72.5 kN; Pa:46.7 kN; Mass pillow block:50.3 kg; Cap bolt:5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 3/8-16 UNC; Appropriate attachment bolt size G:0.75 in; Initial grease fill:481.95 g; |
1.378 Inch | 35 Millimeter x 2.835 Inch | 72 Millimeter x 1.063 Inch | 27 Millimeter NSK 3207J Angular Contact Ball Bearings | da:110 mm; db:123.825 mm; dc:106.362 mm; Da:200 mm; Ca:62.89 mm; A1:120.65 mm; A2:231.775 mm; S:4.763 mm; ba:50.006 mm; H:244.475 mm; H1:125.425 mm; H2:52.388 mm; J min.:320.675 mm; J max.:368.3 mm; J1:69.85 mm; L:419.1 mm; N1:22.225 mm; R1:67.866 mm; R2:31.75 mm; RG:3/8 NPT; PG:1/4 NPT; h:45.244 mm; Housing:SAFS 222; Stabilizing ring:SR-22-19; Taconite seal (db shaft position):TER 121; Taconite seal (dc shaft position):TER 113; End plug (suffix Y):EPR 14; Max. speed for Taconite seal:625 r/min; P60°:178 kN; P90°:107 kN; P120°:66.7 kN; P150°:59.6 kN; P180°:72.5 kN; Pa:46.7 kN; Mass pillow block:50.3 kg; Cap bolt:5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 3/8-16 UNC; Appropriate attachment bolt size G:0.75 in; Initial grease fill:481.95 g; |
1.772 Inch | 45 Millimeter x 3.346 Inch | 85 Millimeter x 1.189 Inch | 30.2 Millimeter NSK 3209J Angular Contact Ball Bearings | da:110 mm; db:123.825 mm; dc:106.362 mm; Da:200 mm; Ca:62.89 mm; A1:120.65 mm; A2:231.775 mm; S:4.763 mm; ba:50.006 mm; H:244.475 mm; H1:125.425 mm; H2:52.388 mm; J min.:320.675 mm; J max.:368.3 mm; J1:69.85 mm; L:419.1 mm; N1:22.225 mm; R1:67.866 mm; R2:31.75 mm; RG:3/8 NPT; PG:1/4 NPT; h:45.244 mm; Housing:SAFS 222; Stabilizing ring:SR-22-19; Taconite seal (db shaft position):TER 121; Taconite seal (dc shaft position):TER 113; End plug (suffix Y):EPR 14; Max. speed for Taconite seal:625 r/min; P60°:178 kN; P90°:107 kN; P120°:66.7 kN; P150°:59.6 kN; P180°:72.5 kN; Pa:46.7 kN; Mass pillow block:50.3 kg; Cap bolt:5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 3/8-16 UNC; Appropriate attachment bolt size G:0.75 in; Initial grease fill:481.95 g; |
3.74 Inch | 95 Millimeter x 5.709 Inch | 145 Millimeter x 0.945 Inch | 24 Millimeter NTN 7119TL Angular Contact Ball Bearings | da:110 mm; db:123.825 mm; dc:106.362 mm; Da:200 mm; Ca:62.89 mm; A1:120.65 mm; A2:231.775 mm; S:4.763 mm; ba:50.006 mm; H:244.475 mm; H1:125.425 mm; H2:52.388 mm; J min.:320.675 mm; J max.:368.3 mm; J1:69.85 mm; L:419.1 mm; N1:22.225 mm; R1:67.866 mm; R2:31.75 mm; RG:3/8 NPT; PG:1/4 NPT; h:45.244 mm; Housing:SAFS 222; Stabilizing ring:SR-22-19; Taconite seal (db shaft position):TER 121; Taconite seal (dc shaft position):TER 113; End plug (suffix Y):EPR 14; Max. speed for Taconite seal:625 r/min; P60°:178 kN; P90°:107 kN; P120°:66.7 kN; P150°:59.6 kN; P180°:72.5 kN; Pa:46.7 kN; Mass pillow block:50.3 kg; Cap bolt:5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 3/8-16 UNC; Appropriate attachment bolt size G:0.75 in; Initial grease fill:481.95 g; |
1.378 Inch | 35 Millimeter x 2.835 Inch | 72 Millimeter x 1.063 Inch | 27 Millimeter NSK 3207JC3 Angular Contact Ball Bearings | da:110 mm; db:123.825 mm; dc:106.362 mm; Da:200 mm; Ca:62.89 mm; A1:120.65 mm; A2:231.775 mm; S:4.763 mm; ba:50.006 mm; H:244.475 mm; H1:125.425 mm; H2:52.388 mm; J min.:320.675 mm; J max.:368.3 mm; J1:69.85 mm; L:419.1 mm; N1:22.225 mm; R1:67.866 mm; R2:31.75 mm; RG:3/8 NPT; PG:1/4 NPT; h:45.244 mm; Housing:SAFS 222; Stabilizing ring:SR-22-19; Taconite seal (db shaft position):TER 121; Taconite seal (dc shaft position):TER 113; End plug (suffix Y):EPR 14; Max. speed for Taconite seal:625 r/min; P60°:178 kN; P90°:107 kN; P120°:66.7 kN; P150°:59.6 kN; P180°:72.5 kN; Pa:46.7 kN; Mass pillow block:50.3 kg; Cap bolt:5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 3/8-16 UNC; Appropriate attachment bolt size G:0.75 in; Initial grease fill:481.95 g; |
1.575 Inch | 40 Millimeter x 3.15 Inch | 80 Millimeter x 1.189 Inch | 30.2 Millimeter NSK 3208JC3 Angular Contact Ball Bearings | da:110 mm; db:123.825 mm; dc:106.362 mm; Da:200 mm; Ca:62.89 mm; A1:120.65 mm; A2:231.775 mm; S:4.763 mm; ba:50.006 mm; H:244.475 mm; H1:125.425 mm; H2:52.388 mm; J min.:320.675 mm; J max.:368.3 mm; J1:69.85 mm; L:419.1 mm; N1:22.225 mm; R1:67.866 mm; R2:31.75 mm; RG:3/8 NPT; PG:1/4 NPT; h:45.244 mm; Housing:SAFS 222; Stabilizing ring:SR-22-19; Taconite seal (db shaft position):TER 121; Taconite seal (dc shaft position):TER 113; End plug (suffix Y):EPR 14; Max. speed for Taconite seal:625 r/min; P60°:178 kN; P90°:107 kN; P120°:66.7 kN; P150°:59.6 kN; P180°:72.5 kN; Pa:46.7 kN; Mass pillow block:50.3 kg; Cap bolt:5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 3/8-16 UNC; Appropriate attachment bolt size G:0.75 in; Initial grease fill:481.95 g; |
1.378 Inch | 35 Millimeter x 2.835 Inch | 72 Millimeter x 1.063 Inch | 27 Millimeter NSK 3207NRJC3 Angular Contact Ball Bearings | da:110 mm; db:123.825 mm; dc:106.362 mm; Da:200 mm; Ca:62.89 mm; A1:120.65 mm; A2:231.775 mm; S:4.763 mm; ba:50.006 mm; H:244.475 mm; H1:125.425 mm; H2:52.388 mm; J min.:320.675 mm; J max.:368.3 mm; J1:69.85 mm; L:419.1 mm; N1:22.225 mm; R1:67.866 mm; R2:31.75 mm; RG:3/8 NPT; PG:1/4 NPT; h:45.244 mm; Housing:SAFS 222; Stabilizing ring:SR-22-19; Taconite seal (db shaft position):TER 121; Taconite seal (dc shaft position):TER 113; End plug (suffix Y):EPR 14; Max. speed for Taconite seal:625 r/min; P60°:178 kN; P90°:107 kN; P120°:66.7 kN; P150°:59.6 kN; P180°:72.5 kN; Pa:46.7 kN; Mass pillow block:50.3 kg; Cap bolt:5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 3/8-16 UNC; Appropriate attachment bolt size G:0.75 in; Initial grease fill:481.95 g; |
1.772 Inch | 45 Millimeter x 3.346 Inch | 85 Millimeter x 0.748 Inch | 19 Millimeter NTN 7209BGC3 Angular Contact Ball Bearings Video