Angular Contact Ball Bearings
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.
The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis.
Angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. NTN’s 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. The 3200 and 3300 series have filling slots, so it is necessary to mount them with the thrust load acting against the un-notched face of the rings.
- FAG 7232-B-MP-UO Angular Contact Ball Bearings
- 3/4 in
- 1.3750 in
- FAG 7303-B-TVP-UO Angular Contact Ball Bearings
- 15 mm
- 18 mm
- FAG 7304-B-JP-UA Angular Contact Ball Bearings
- 400 mm
- 650 mm
- FAG 7303-B-TVP-UA Angular Contact Ball Bearings
- 280 mm
- 500 mm
- FAG 7302-B-TVP-UA Angular Contact Ball Bearings
- 420 mm
- 620 mm
- FAG 7302-B-TVP-UO Angular Contact Ball Bearings
- 400 mm
- 600 mm
- FAG 3209-BD-TVH-C3 Angular Contact Ball Bearings
- 25 mm
- 62 mm
- FAG 3209-BD-2Z-TVH-C3 Angular Contact Ball Bearings
- 360 mm
- 600 mm
- FAG 3209-BD-2HRS-TVH-C3 Angular Contact Ball Bearings
- 87.313 mm
- 180 mm
- FAG 3208-BD-C3 Angular Contact Ball Bearings
- 400 mm
- 600 mm