Single Row Ball Bearings
Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- TIMKEN 16016 Single Row Ball Bearings
- 1120 mm
- 1540 mm
- TIMKEN 16011-C3 Single Row Ball Bearings
- 850 mm
- 1280 mm
- TIMKEN 16005-ZZ Single Row Ball Bearings
- 440 mm
- 720 mm
- TIMKEN 61907-2RZ Single Row Ball Bearings
- TIMKEN
- 61907-2RZ
- TIMKEN 6026M Single Row Ball Bearings
- 750 mm
- 1090 mm
- TIMKEN 63008-2RS Single Row Ball Bearings
- 1060 mm
- 1460 mm
- SKF 6020 M/C4 Single Row Ball Bearings
- 950 mm
- 1250 mm
- SKF 6315 M/C3 Single Row Ball Bearings
- 25 mm
- 62 mm
- SKF 6212-2Z/C4 Single Row Ball Bearings
- 60 mm
- 130 mm
- SKF 6222 M/C3 Single Row Ball Bearings
- 630 mm
- 920 mm
- 80 mm x 140 mm x 26 mm SKF 6216 NR Single Row Ball Bearings
- 1000 mm
- 1470 mm