Self Aligning Ball Bearings
This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing center. Pressed steel cages are usually used. Since the contact angle is small, the axial load capacity is low. The permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees) under normal loads.
However, depending on the surrounding structure, such an angle may not be possible.
- 55 mm x 100 mm x 60 mm FAG 11211-TVH Self Aligning Ball Bearings
- Mounted Cartridge Units
- 0.0
- 105 mm x 225 mm x 49 mm FAG 1321-M Self Aligning Ball Bearings
- Ball Bearings
- 0.0
- 150 mm x 270 mm x 54 mm FAG 1230-M Self Aligning Ball Bearings
- Single Row Ball Bearing
- 0.0
- NACHI 1307 C3 Self Aligning Ball Bearings
- Plain Bearing Spherical Rod Ends
- 0.0
- NACHI 1309 C3 Self Aligning Ball Bearings
- Bearings
- 0.0
- NACHI 1308K C3 Self Aligning Ball Bearings
- Bearings
- 0.0
- KOYO 1313C3 Self Aligning Ball Bearings
- Bearings
- 0.0
- KOYO 1310KC3 Self Aligning Ball Bearings
- Bearings
- 0.0
- KOYO 1214K Self Aligning Ball Bearings
- Bearings
- 0.0
- KOYO 1214KC3 Self Aligning Ball Bearings
- Bearings
- 0.0