ROLLWAY BEARING Sales Co., Ltd.

Angular Contact Ball Bearings

Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.

The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis.

Angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. NTN’s 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. The 3200 and 3300 series have filling slots, so it is necessary to mount them with the thrust load acting against the un-notched face of the rings.

FAG 7226-B-TVP-UA Angular Contact Ball Bearings
110.000 mm
200.0000 mm
◂ Previous page Next page ▸
All Products Contact Now
Product Categories
Angular Contact Ball Bearings
Cam Follower and Track Roller - Stud Type
Cartridge Unit Bearings
Cylindrical Roller Bearings
Flange Block Bearings
Mounted Units & Inserts
Needle Non Thrust Roller Bearings
Pillow Block Bearings
Precision Ball Bearings
Self Aligning Ball Bearings
Single Row Ball Bearings
Sleeve Bearings
Spherical Plain Bearings - Rod Ends
Spherical Roller Bearings
Take Up Unit Bearings
Tapered Roller Bearing Assemblies
Timken Np053874 Bearing
6206 Koyo Bearing
Timken 30208 Bearing
Koyo 6202 2rs Bearing
SKF Bearing
Angular Contact Ball Bearing
Thrust Roller Bearings
Crossed Roller Bearing
NOK OIL SEAL
SKF SHAFT SEALS
TIMKEN NATIONAL SEALS