Self Aligning Ball Bearings
This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing center. Pressed steel cages are usually used. Since the contact angle is small, the axial load capacity is low. The permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees) under normal loads.
However, depending on the surrounding structure, such an angle may not be possible.
- NTN 2314L1C2 Self Aligning Ball Bearings
- Roller Bearings
- 0.0
- PT INTERNATIONAL 2306K Self Aligning Ball Bearings
- Flange Block
- 0.0
- NTN 2313C3 Self Aligning Ball Bearings
- Bearings
- 0.0
- NTN 2313 Self Aligning Ball Bearings
- Mounted Units & Inserts
- 0.0
- FAG 1317 Self Aligning Ball Bearings
- Bearings
- 0.0
- FAG 1310-K Self Aligning Ball Bearings
- Bearings
- 0.0
- NTN 2317L1 Self Aligning Ball Bearings
- Flange Block
- 0.0
- NSK 2204 2RSTNH Self Aligning Ball Bearings
- Pillow Block
- 0.0
- NTN 1321 Self Aligning Ball Bearings
- Bearings
- 0.0
- NTN 1321C3 Self Aligning Ball Bearings
- Flange Block
- 0.0
- NTN 1320C3 Self Aligning Ball Bearings
- Pillow Block
- 0.0
- NTN 1320L1KC3 Self Aligning Ball Bearings
- Single Row Ball Bearing
- 0.0