Self Aligning Ball Bearings
This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing center. Pressed steel cages are usually used. Since the contact angle is small, the axial load capacity is low. The permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees) under normal loads.
However, depending on the surrounding structure, such an angle may not be possible.
- NSK 1316KJC3 Self Aligning Ball Bearings
- Bearings
- 0.0
- NSK 1311KJC3 Self Aligning Ball Bearings
- Mounted Cartridge Units
- 0.0
- NTN 2205KC3 Self Aligning Ball Bearings
- Mounted Units & Inserts
- 0.0
- NTN 2310L1C3 Self Aligning Ball Bearings
- Precision Ball Bearings
- 0.0
- NTN 2311L1KC3 Self Aligning Ball Bearings
- Thrust Ball Bearings
- 0.0
- NTN 2311L1C3 Self Aligning Ball Bearings
- Bearings
- 0.0
- NTN 2311L1 Self Aligning Ball Bearings
- Bearings
- 0.0
- SKF 2206 E-RS1TN9/C3 Self Aligning Ball Bearings
- Cylindrical Roller Bearing
- 0.0
- SKF 2206 EKTN9/C3 Self Aligning Ball Bearings
- Sleeve Bearings
- 78.0
- SKF KAM 1208 Self Aligning Ball Bearings
- Tapered Roller Bearings
- 0.0
- SKF 2318 KM/C3 Self Aligning Ball Bearings
- Plain Bearing Spherical Rod Ends
- 0.0
- SKF 2218 KM/C3 Self Aligning Ball Bearings
- Flange Block
- 0.0