Self Aligning Ball Bearings
This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing center. Pressed steel cages are usually used. Since the contact angle is small, the axial load capacity is low. The permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees) under normal loads.
However, depending on the surrounding structure, such an angle may not be possible.
- KOYO 1212KC3 Self Aligning Ball Bearings
- Bearings
- 0.0
- KOYO 1211KC3 Self Aligning Ball Bearings
- Bearings
- 0.0
- KOYO 1317KC3 Self Aligning Ball Bearings
- Bearings
- 0.0
- NACHI 1215K C3 Self Aligning Ball Bearings
- Bearings
- 0.0
- NACHI 1214K Self Aligning Ball Bearings
- Bearings
- 0.0
- NACHI 1210K Self Aligning Ball Bearings
- Roller Bearings
- 0.0
- NACHI 1314K Self Aligning Ball Bearings
- Bearings
- 0.0
- NACHI 1309K C3 Self Aligning Ball Bearings
- Bearings
- 0.0
- KOYO 2310 K Self Aligning Ball Bearings
- Thrust Roller Bearings
- 0.0
- NSK 2210K Self Aligning Ball Bearings
- Bearings
- 0.0
- INA 2204-2RS Self Aligning Ball Bearings
- Mounted Cartridge Units
- 0.0