ROLLWAY BEARING Sales Co., Ltd.

Self Aligning Ball Bearings

This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing center. Pressed steel cages are usually used. Since the contact angle is small, the axial load capacity is low. The permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees) under normal loads.
However, depending on the surrounding structure, such an angle may not be possible.

CONSOLIDATED BEARING 1204 Self Aligning Ball Bearings
Angular Contact Ball Bearing
0.0
CONSOLIDATED BEARING 1203 C/3 Self Aligning Ball Bearings
Sleeve Bearings
8.0
CONSOLIDATED BEARING 1203 Self Aligning Ball Bearings
Bearings
0.0
CONSOLIDATED BEARING 1202 Self Aligning Ball Bearings
Bearings
0.0
CONSOLIDATED BEARING 1201 Self Aligning Ball Bearings
Take Up Units
0.0
CONSOLIDATED BEARING 1201 M Self Aligning Ball Bearings
Single Row Ball Bearing
0.0
CONSOLIDATED BEARING 1200 Self Aligning Ball Bearings
Bearings
0.0
◂ Previous page Next page ▸
All Products Contact Now
Product Categories
Angular Contact Ball Bearings
Cam Follower and Track Roller - Stud Type
Cartridge Unit Bearings
Cylindrical Roller Bearings
Flange Block Bearings
Mounted Units & Inserts
Needle Non Thrust Roller Bearings
Pillow Block Bearings
Precision Ball Bearings
Self Aligning Ball Bearings
Single Row Ball Bearings
Sleeve Bearings
Spherical Plain Bearings - Rod Ends
Spherical Roller Bearings
Take Up Unit Bearings
Tapered Roller Bearing Assemblies
Timken Np053874 Bearing
6206 Koyo Bearing
Timken 30208 Bearing
Koyo 6202 2rs Bearing
SKF Bearing
Angular Contact Ball Bearing
Thrust Roller Bearings
Crossed Roller Bearing
NOK OIL SEAL
SKF SHAFT SEALS
TIMKEN NATIONAL SEALS