Single Row Ball Bearings
Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- EBC 1628 ZZ BULK Single Row Ball Bearings
- 340 mm
- 520 mm
- EBC 6315 2RS C3 Single Row Ball Bearings
- 280 mm
- 500 mm
- EBC 6314 ZZ C3 Single Row Ball Bearings
- 400 mm
- 600 mm
- PEER BEARING CO. 1616-2RS Single Row Ball Bearings
- Open
- Single Row
- RIT BEARING SR8 2RS Single Row Ball Bearings
- 360 mm
- 600 mm
- RIT BEARING SR4-ZZ Single Row Ball Bearings
- 380 mm
- 560 mm
- RIT BEARING SR6-2RS Single Row Ball Bearings
- 380 mm
- 560 mm
- RIT BEARING 6904 2RS Single Row Ball Bearings
- NUP2226EM
- 1
- RIT BEARING R14 ZZ Single Row Ball Bearings
- NU2219ET7
- 1
- RIT BEARING R2 ZZ Single Row Ball Bearings
- Open
- Cylindrical Bore
- RIT BEARING 6903 ZZ Single Row Ball Bearings
- 1.12
- 687VV
- RIT BEARING 6905 ZZ Single Row Ball Bearings
- 460 mm
- 760 mm