Single Row Ball Bearings
Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- RIT BEARING 6905 2RS Single Row Ball Bearings
- Cylindrical Bore
- Open
- RIT BEARING 6904 ZZ Single Row Ball Bearings
- 30 mm
- 49.2 mm
- RIT BEARING 6302 Single Row Ball Bearings
- 65 mm
- 110 mm
- RIT BEARING R12ZZ Single Row Ball Bearings
- 110 mm
- 170 mm
- RIT BEARING 6908 2RS Single Row Ball Bearings
- 280 mm
- 420 mm
- RIT BEARING 6205 2RSNR Single Row Ball Bearings
- 55 mm
- 120 mm
- RIT BEARING 6907 ZZ Single Row Ball Bearings
- 220 mm
- 400 mm
- NICE BALL BEARING 1641 DCTN Single Row Ball Bearings
- 280 mm
- 380 mm
- EBC 6307 2RS C3 Single Row Ball Bearings
- 55 mm
- 100 mm
- EBC 1623 2RS Single Row Ball Bearings
- 320 mm
- 480 mm