Single Row Ball Bearings
Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- RIT BEARING 6804 ZZ Single Row Ball Bearings
- 15 mm
- 35 mm
- RIT BEARING 6903 2RS Single Row Ball Bearings
- 170 mm
- 260 mm
- RIT BEARING 6801 2RS Single Row Ball Bearings
- 140 mm
- 210 mm
- RIT BEARING 6901 ZZ Single Row Ball Bearings
- 20 mm
- 47 mm
- RIT BEARING 6902 2RS Single Row Ball Bearings
- Open
- Cylindrical Bore
- RIT BEARING 6900 ZZ Single Row Ball Bearings
- 300 mm
- 460 mm
- RIT BEARING 6807 2RS Single Row Ball Bearings
- 300 mm
- 500 mm
- RIT BEARING 6805 2RS Single Row Ball Bearings
- Single Row
- Open
- RIT BEARING 6803 2RS Single Row Ball Bearings
- 55 mm
- 120 mm
- RIT BEARING 6802 ZZ Single Row Ball Bearings
- 130 mm
- 210 mm