Single Row Ball Bearings
Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- RIT BEARING 6802 2RS Single Row Ball Bearings
- 110 mm
- 200 mm
- EBC 627 ZZ Single Row Ball Bearings
- 460 mm
- 760 mm
- RIT BEARING 6028 2RS Single Row Ball Bearings
- 440 mm
- 650 mm
- RIT BEARING 6017 ZZ Single Row Ball Bearings
- 35 mm
- 80 mm
- EBC R12 Single Row Ball Bearings
- 190 mm
- 340 mm
- EBC 6204 ZZ C3 Single Row Ball Bearings
- 220 mm
- 370 mm
- EBC 6203 ZZ C3 Single Row Ball Bearings
- 200 mm
- 310 mm
- BOSTON GEAR 1641DC Single Row Ball Bearings
- 630 mm
- 1030 mm
- CONSOLIDATED BEARING E-19 Single Row Ball Bearings
- 180 mm
- 320 mm
- CONSOLIDATED BEARING E-9 Single Row Ball Bearings
- 140 mm
- 250 mm