Single Row Ball Bearings
Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- SKF 6215-2RS1/C3GJN Single Row Ball Bearings
- 300 mm
- 460 mm
- SKF 6007-2RS1NR/C3GJN Single Row Ball Bearings
- 1060.355 mm
- 1400 mm
- SKF 6317-2Z/C3GJN Single Row Ball Bearings
- 360 mm
- 540 mm
- SKF 6003-Z/C3 Single Row Ball Bearings
- 560 mm
- 800 mm
- SKF 6206-2RS1/C3W64 Single Row Ball Bearings
- 710 mm
- 1030 mm
- SKF 6005-2RSH/C2 Single Row Ball Bearings
- 900 mm
- 1340 mm
- SKF 6017 2ZNRJEM Single Row Ball Bearings
- 900 mm
- 1180 mm
- SKF 6017 2RSNRJEM Single Row Ball Bearings
- 400 mm
- 600 mm
- SKF 6016 2RSJEM Single Row Ball Bearings
- Cylindrical Bore
- Open
- SKF 6013 2ZNRJEM Single Row Ball Bearings
- 240 mm
- 360 mm