Single Row Ball Bearings
Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- SKF 6015 2ZNRJEM Single Row Ball Bearings
- 260 mm
- 400 mm
- SKF 6013 2RSNRJEM Single Row Ball Bearings
- 950 mm
- 1250 mm
- SKF 6010 2ZNRJEM Single Row Ball Bearings
- 1
- STF279KVS3951E
- SKF 6008 RSJEM Single Row Ball Bearings
- 400 mm
- 600 mm
- SKF 6008 2RSNRJEM Single Row Ball Bearings
- 360 mm
- 600 mm
- SKF 6007 2ZNRJEM Single Row Ball Bearings
- 800 mm
- 1150 mm
- SKF E2.6003-2Z/C3 Single Row Ball Bearings
- Open
- Cylindrical Bore
- EBC 6314 Single Row Ball Bearings
- 1.06
- 695VV
- EBC 6218 ZZ Single Row Ball Bearings
- 320 mm
- 480 mm
- EBC 689 ZZ Single Row Ball Bearings
- 850 mm
- 1120 mm
- EBC 698 ZZ Single Row Ball Bearings
- 600 mm
- 920 mm
- EBC 638 ZZ Single Row Ball Bearings
- 800 mm
- 1060 mm